KEYES 5V 1/2/4/8 Channel OMRON Solid State Relay Module for Arduino DIY Project

Description

Store category
Sign Up Now !
You may also like
KEYES 5V 1/2/4/8 Channel OMRON Solid State Relay Module for Arduino DIY Project
Product Description
1 Channel Solid State Relay Module
:
The input terminal can only be connected to DC power, and the output terminal can only be connected to AC power. Maximum operating current is 2A
.
1. Omron 5V solid-state relay, 240V/2A, fuse with resistance 240V/2A.
2. size: 25*34*25 (length * width * height)
3. input power supply: 5VDC
4. input control signal voltage:
(0-2.5V, low level status, relay ON)
(3-5V, high level status, relay OFF)
Module interface:
Input:
(DC+: connect power positive (power supply according to relay voltage)
DC-: connect power negative
CH1: signal trigger end of relay module (low level trigger)
Meaning of high level and low level:
High level trigger refers to a forward voltage between the signal trigger end (CH) and the power negative pole. The trigger is usually realized by connecting power positive end to the signal trigger end. When the trigger end has positive voltage or voltage reaches the trigger point, relay is closed.
Low level trigger refers to a 0V between the signal trigger end and the power negative pole, or the voltage of the trigger end is lower than that of the power positive pole, which reaches the level of trigger point, the relay is closed. The trigger is usually realized by connecting power negative end to the signal trigger end.
Electrical parameters:
Voltage quiescent current working current trigger voltage trigger current
contact 1 5V 0mA 12.5mA 3.3-5V 2mA
2 Channel Solid State Relay Module
:
1. Omron 5V solid-state relay, 240V/2A, fuse with resistance 240V/2A.
2. size: 55*33*25 (length * width * height)
3. input power supply: 5VDC
4. input control signal voltage:
(0-2.5V, low level status, relay ON)
(3-5V, high level status, relay OFF)
Module interface:
Input:
(DC+: connect power positive (power supply according to relay voltage)
DC-: connect power negative
CH1: signal trigger end of relay module (low level trigger)
CH2: signal trigger end of relay module (low level trigger)
Electrical parameters:
Voltage quiescent current working current trigger voltage trigger current
contact 1 5V 0mA 12.5mA 3.3-5V 2mA
contact 2 5V 0mA 12.5mA 3.3-5V 2mA
Product instructions:
1. power supply of module: power supply must be DC, voltage should match the relay voltage.
2. wiring method: when signal trigger end has low level trigger, relay will be on, equipment will be working with electricity.
4 Channel Solid State Relay Module
:
1. Omron 5V solid-state relay, 240V/2A, fuse with resistance 240V/2A.
2. size: 57 * 55 * 25 (length * width * height)
3. input power supply: 5VDC
4. input control signal voltage:
(0-2.5V, low level status, relay OFF)
(3-5V, high level status, relay ON)
Module interface:
Input:
(DC+: connect power positive (power supply according to relay voltage)
DC-: connect power negative
CH1: signal trigger end of relay module (high level trigger)
CH2: signal trigger end of relay module (high level trigger)
CH3: signal trigger end of relay module (high level trigger)
CH4: signal trigger end of relay module (high level trigger)
Electrical parameters:
Voltage quiescent current working current trigger voltage trigger current
contact 1 5V 0mA 12.5mA 3.3-5V 2mA
contact 2 5V 0mA 12.5mA 3.3-5V 2mA
contact 3 5V 0mA 12.5mA 3.3-5V 2mA
contact 4 5V 0mA 12.5mA 3.3-5V 2mA
Product instructions:
1.
power supply of module: power supply must be DC, voltage should match the relay voltage.
The input terminal can only be connected to DC power, and the output terminal can only be connected to AC power. Maximum operating current is 2A
2. wiring method: when signal trigger end has low level trigger, relay will be on, equipment will be working with electricity.
8 Channel Solid State Relay Module
:
1.Omron 5V solid-state relay, 240V/2A, fuse with resistance 240V/2A.
2.input power supply: 5V DC (160MA)
3. input control signal voltage:
(0-2.5V, low level status, relay OFF)
(3-5V, high level status, relay ON)
4. More convenient to use KF301 port for control line connecting.
Module interface:
1. Input:
DC+: connect power positive ＶＣＣ（power supply according to relay voltage）
DC-: connect power negative ＧＮＤ
CH1: signal trigger end of relay module contact 1 (high level trigger)
CH2: signal trigger end of relay module contact 2 (high level trigger)
CH3: signal trigger end of relay module contact 3 (high level trigger)
CH4: signal trigger end of relay module contact 4 (high level trigger)
CH5: signal trigger end of relay module contact 5 (high level trigger)
CH6: signal trigger end of relay module contact 6 (high level trigger)
CH7: signal trigger end of relay module contact 7 (high level trigger)
CH8: signal trigger end of relay module contact 8 (high level trigger)
Electrical parameters:
Voltage quiescent current working current trigger voltage trigger current
Contact 1 5V 0mA 13.8mA 3-5V 2mA
Contact 2 5V 0mA 26.8mA 3-5V 2mA
Contact 3 5V 0mA 37mA 3-5V 2mA
Contact 4 5V 0mA 48mA 3-5V 2mA
Contact 5 5V 0mA 59mA 3-5V 2mA
Contact 6 5V 0mA 70mA 3-5V 2mA
Contact 7 5V 0mA 81mA 3-5V 2mA
Contact 8 5V 0mA 90mA 3-5V 2mA
Product instruction:
power supply of module: power supply must be DC, voltage should match the relay voltage.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
My shop has many arduino /
Micro:Bit /
Raspberry Pi kits.
If you have any questions about the item, please contact me via eBay message.
Delivery details
It takes 6-13 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 15-35 working days.
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
Terms of sales
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
We also offer 30 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
If you are unclear about product usage, please feel free to contact us.
We will offer your detailed instructions for use.
About us
Contact us
Your feedback is very important for us, if you are satisfied with our products, please give us good feedback. Of course, we will give you praise too.
If you are not satisfied with our products or haven't receive your item in estimated delivery time,
Please don't hesitate to contact us via ebay message. Please don't open a case or leaving a negative feedback before
contacting us, we will always do our best to help solve your problem and offer you a satisfactory response. Thank you very much for your support and understanding.
Payment
Shipping
Return policy
About us
Feedback