ESD Safe Mat 18"x30"x.080", Wrist Strap, Ground Cord & Universal Snap Kit

Description

COMPLETE ESD KIT:
This anti-static, multi-purpose kit is composed of a 18"x30"x0.080" mat, one ESD wrist band with a 4mm snap and 5' coil cord w/ alligator clip, one 15' common point ground cord made with 7 strand tinsel wire to #10 ring terminal and dual standard banana jacks, and a universal snap kit with multiple size screws to put into your mat.
CREATE A SAFE WORK ENVIRONMENT:
Provide a path-to-ground for electrical charges as well as protecting your work surface from damage. The 18"x30"x0.080" mat has a conductive layer backing a static dissipative top layer that creates outstanding electric performance characteristics.
DURABILITY:
Two-fold purpose: ESD Protection and Worksurface Protection. Made from durable, high-temperature resistant rubber, the ESD table mat is an excellent worksurface covering.  Protect from wear and tear, solder splashes, cuts,
gouges and other issues related to production/assembly/repair.
EASY INSTALLATION:
The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
MEETS ESD STANDARDS
: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
APPLICATIONS:
Grounding/Earthing, controlling electrostatic discharge, protecting electronic components, parts and computers inside the lab or manufacturing environment with proper use of ESD mat.  Excellent for Computer/ Cell Phone Repair, General Assembly, Electronics MFG, Medical Device MFG, Semiconductor MFG.
Specifications: Thickness 0.080”
Hardness 60 Shore A
Temperature 190F (87C)
Color Green
Rubber Premium NBR
RTG 8 x 10ohms
RTT 2 x 10ohms
Charge Decay 0.01Seconds
Work surface 10^6 - 10^8 ohms Rtt
Size: 18"x30"x0.080"