Chip extractor Circuit Board Component Removal Puller Equipment Useful

Description

Product Description
Chip extractor Circuit Board Component Removal Puller Equipment Useful
Features:
*100% brand new and high quality
*Extract PLCC / IC on circuit board.
Metal and shielded plastic avoids static charge damage IC components
*Perfect for repair kits, such as TV / DVD / PC technicians or IC workers
*Small hook for easy extraction and installation.
*Simple to use, ergonomic, static-safe
*With spring-assistance, simply align the pull pins to the chip, and squeeze to safely remove any chip in the 20-Pin to 80-pin ranges
*
Extractor
:
1.
The PLCC can be easily removed from the substrate without damaging any IC conductors. ICC, PGA, PCLL, DIP package IC can be pulled out from SOCKET or PCB
2.
Use the handshake method to pull up the IC steadily in the vertical direction (not forced to pull up), so that the IC can be obtained to obtain the complete PIN
3.
For densely arranged IC, they can be directly pulled out without moving to other IC
4.
IC with different sizes within 5.5cm of the touch surface can be pulled out in a short time, which is easy and labor-saving. When pulling out PLCC chip, If you use a slotted screwdriver, it is not easy to use because there are other components around it. The extraction clip is difficult to remove. If it is not properly operated, it will cause damage to the socket or chip, and even cause the chip to be broken . We can prepare the chip for you, which can be directly used on the board to facilitate the extraction of PLCC. The packaged chip is a good tool for drawing up various chips and integrated blocks. It is used for motherboard, single chip microcomputer and programmer. This is the PLCC chip pick-up folder, which is more suitable for easy extraction of PLCC chip. It can be used to dial PLCC size: 20 to 84 feet. For specific use, insert the two legs of the pull-out clip from the two notches of the chip socket, then hold the clip and tighten the clip with a little force to easily pull out the chip. For PLCC package The chip, due to its special package form, should be operated with a dedicated chip pick-up clip. Use a ROM extractor to clamp a corner of the BIOS chip and its opposite corners, press the pick-up clip, and pull the chip straight up from the socket. Out. Note that the clip is the corner where the non-bevel is located. Take's claw should be thorough as possible outlet. To disconnect the chip, to be quite cautious, Incorrect handling or improper force, or damage the motherboard BIOS chip could itself
Specifications:
*Color:
Green,Black
(
As Pictures Show
)
*Material: ABS+metal
*Chip extractor size: 10cm long
(Approx.)
*U-shape Extractor puller size: 10cm long
(Approx.)
*Very suitable for integrated circuit chip repair kit
* Easy to use, ergonomic
Package Contents:
1*PLCC IC Extractor
1
*
U-shape Extractor
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.