8 Channel USB/Wireless 5V Timer Relay Module Support iOS and Android - TOSR08-D

Description

Control TOSR08 Relay Board by iPad mini iOS via WiFi Video:
HTTPS://www.youtube.com/watch?v=s_ixKVG3YaU
Description:
This is a USB/Wireless Timer Relay Module, It allows computer control switching of external devices
by using the USB port of your computer!
Meanwhile, It  has a wireless
extension
port, can work with XBEE or Bluetooth Bee or Wifly Module, which mean now you can
control your device by zigbee
or Bluetooth or WiFi !
The TOSR08-D module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.
It's also support delay timer function. You can set each relay output delay from
0 second - 24 hours
.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the TOSR08-D is here:
G5LA datasheet
If you use DC Power ,the Input voltage should be DC5V.
First Step - Install the Driver
The TOSR08-D module uses FT232RL USB to UART chip . Before using the TOSR08-D you will need to download the
FT232RL Driver
.
Connect the TOSR08-D and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR08-D will now appear as a com port.
Commands
The TOSR08-D operates with an easy to use command set as described in the table below.
TOSR08-D Baud rate : 9600
Test program
To get the TOSR08-D up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Documents:
User Manual
G5LA datasheet
FT232RL Driver
Test Program
Realterm serial debug tool
Controlling a TOSR0x USB Relay Module Using Python
(Thanks James!)
Linux Python module
iPhone APP (WIFI)
Timing function is not supported
Android APP(WIFI)
Android APP(Bluetooth)