-40%
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller
5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller

5V Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller

$ 5.27

Availability: 60 in stock
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Refund will be given as: Money Back
  • Condition: New
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Restocking Fee: No

    Description

    Packing List
    5 X 4-Channel 433mhz RF wireless learning receiver
    5 X 4 KEY remote transmitter
    (battery included)
    Product Introduction:
    1 Working voltage:
    4.5-5.5V DC
    2
    VCC: power supply positive, GND: power supply negative
    3 Maximum Output Current: 10mA (each channel)
    4 Static working current:3mA(Relay is released)
    5
    Module Dimension: 20mm*30mm*6mm
    6
    Module Type: 433mHz RF wireless receiver module
    7 Receiver Distance: 15-100m
    8
    Working Mode
    :
    Self-locking/Jog/Interlock
    9
    Working Indication:
    LED D1 light ( learning and signals indicator light)
    10 Outlet: OUT1-OUT4 are four different outlets
    How to set learning module?
    1:Set 1st channel learning way: Supply power to the module, press the “learning key” one time, the LED D1 light will flash one time, it means the first channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully.
    2:Set 2nd channel learning way: Supply power to the module, press the “learning key” one time, the LED D1 light will flash two times, it means the second channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully.
    3:Set 3rd channel learning way: Supply power to the module, press the “learning key” one time, the LED D1 light will flash three times, it means the third channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully.
    4:Set 4th channel learning way: Supply power to the module, press the “learning key” one time, the LED D1 light will flash fourth times, it means the third channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully.
    5 Cancel learning way: Keep pressing the “learning key”, then supply power to the module,
    When you see the indicator light flash four times, it means you cancel the learning successfully.
    How to change the working mode?
    1 Interlock: Press the “
    learning key
    ” then supply power to the module, after you see the indicator light flash one times, then do not press the “learning key” any more. Now the working mode is interlock control.
    2 Self-lock: Press the “
    learning key
    ” then supply power to the module, after you see the indicator light flash two times, then do not press the “learning key” any more. Now the working mode is self-lock control.
    3 Jog: Press the “
    learning key
    ” then supply power to the module, after you see the indicator light flash three times, then do not press the “learning key” any more. Now the working mode is inching control.